SFM30N POSITIVE PRESSURE CASSETE TYPE SINGLE FACER
SFM30N POSITIVE PRESSURE CASSETE TYPE SINGLE FACER
Total Installed Capacity: 83.39Kw
l THE MACHINE ADOPTS POSITIVE PRESSURE AIR CUSHION PAPER GUIDE, WITH HIGH UTILIZATION OF HEAT ENERGY, AND GOOD QUALITY OF CORRUGATED SHAPING. USE FAN TO BLOW, MAKE THE CORRUGATED PAPER CLING ONTO THE CORRUGATED ROLLERS, AND MAKE PAPER CROSSING SUCCESSFULLY.
l CORRUGATED ROLLER ADOPTS POSITIVE PRESSURE CASSETE TYPE. IT’S UNDER THE PRESSURE ROLLER, SO AS TO LOWER THE CENTER OF GRAVITY OF THE MACHINE. UPPER AND LOWER CORRUGATED ROLLERS USE SMALL AND LARGER ROLLER TO MATCH UP WITH EACH OTHER, WITH DIFFERENT ROTATE SPEED, AND USE PRE-CASTED BASE. IT’S SMOOTH WHEN UNDER HIGH-SPEED OPERATION, AND REDUCES VIBRATION, SO IT’S MORE STABLE AND SMOOTH DURING OPERATION. CORRUGATED ROLLER EXCHANGE IS SAVER AND FASTER.
l THE OPENING AND CLOSING OF CORRUGATED ROLLERS, PRESSURE ROLLERS, GLUE ROLLERS, AND THE LOCKING OF CORRUGATED ROLLER SET ARE ALL HYDRAULIC CONTROLLED.
l CORRUGATED ROLLER SETS GET IN AND OUT HYDRAULIC AUTOMATICALLY, SO AS TO EXCHANGE DIFFERENT FLUTES RAPIDLY. CORRUGATED ROLLER SET COULD MOVE IN AND OUT FROM BOTH OPERATION AND DRIVING SIDE. IT MOVE IN AND OUT DRIVEN BY HYDRAULIC MOTOR CONNECTING WITH GEAR, THEN DRIVE THE RACK. BECAUSE IT USE PRESSURE ADJUSTMENT TO REPLACE THE TRADITIONAL CLEARANCE ADJUSTMENT, DO NOT NEED READJUSTMENT AFTER ROLLER CHANGING, AND SAVE MORE TIME. EUIPPED WITH ROLLER CHANGING DOLLY, WHICH IS MANUAL. YOU COULD EQUIPPED WITH ROLLER CHANGING PLATFORM ON THE DRIVING SIDE, WHICH WILL MAKE THE ROLLER CHANGING MUCH MORE CONVENIENT.
l THE PRESSURE ADJUSTMENT BETWEEN CORRUGATED ROLLER AND PRESSING ROLLER ARE INDEPENDENTLY CONTROLED BY TWO POSITIVE AND NEGATIVE AIR CYLINDER (ON BOTH SIDES). THE PRESSURE ADJUSTMENT BETWEEN CORRUGATED ROLLER AND GLUE ROLLER ARE HYDRAULIC CONTROL.
l THE CORRUGATED ROLLERS ARE DRIVEN BY MOTOR SYNCHRONOUS BELT, RUNNING SATBLE AND LOW NOISE. PRESSING ROLLER AND GLUE ROLLER USE THE FRICTION FORCE OF THE CORRUGATED ROLLER, TO DRIVE THE PRESSING ROLLER AND GLUE ROLLE TO MOVE, WHICH ENSURE THE WORKING LINE SPEED OF ALL ROLLERS ARE MATCH UP WITH EACH OTHERS. THERE ARE TRANSMISSION RINGS ON TWO END OF GLUE ROLLER SURFACE.
l THE GLUE RULLOR HAS LOW SPEED AUTO-ROTATE , SO AS TO AVOID THE GLUE DRY ON THE GLUR RULLOR.
l INDIVIDUAL GLUE SECTION COULD SWIN OUT FROM THE MAIN MACHINE, AND IT’S EASY TO CLEAN AND MAINTAIN.. HYDRAULIC PRESSURE SWING ARM STRUCTURE MAKE THE GLUE PART LOCATION MORE STABLE. ELECTRICAL PUSHER ARM TYPE MASHING STRUCTURE MAKES GLUE APPLYING MORE ACCURATELY. AN ELECTRIC GLUE PARTITION DEVICE IS PROVIDED TO GIVE CONVINIENT AND RAPID PAPER WIDTH ADJUSTMENT.
l ALL BEARINGS OF THE UPPER AND LOWER CORRUGATED ROLLERS, AND PRESSURE ROLLER ADOPT HIGH TEMPERATURE GREASE（DUPONT）, SO AS TO GUARANTEE LONG LIFE AND SMOOTH RUNNING OF THE ROLLERS. CORRUGATED ROLLERS, PRESSURE ROLLER, GLUE ROLLER AND DOCTOR ROLLERS USE IMPORTED BRAND.
l THERE IS A FACE PAPER PRE-HEATING ROLLER AND CORE PAPER PRE-HEATING ROLLER IN THIS MACHINE. THE PRE-HEATING CYLINDER COULD ROTATE AUTOMATICALLY BY MOTOR. THERE IS A CONDITIONING STEAM INJECTOR FOR CORE PAPER INSTALLED IN THE MACHIN. PAPER OUTPUT EQUIPED WITH ARC-SHAPED HEATING PLATE, SO AS TO GUARANTEE STABLE QUALITY WHEN HIGH SPEED. THERE IS A CONDITIONING STEAM INJECTOR FOR CORE PAPER INSTALLED IN THE MACHINE.
l EQUIPPED WITH AIR-COOLED COOLING-WATER MACHINE FOR WATER-COOLING GLUE BAFFLE BOARD AND HYDRAULIC PRESSURE STATION. WATER-COOLING GLUE BAFFLE BOARD COULD AVOID GLUE TO DRY, AND COOLING OF HYDRAULIC OIL MAKE THE HYDRAULIC PRESSING SYSTEM MORE STABLE.
l WALLBOARD AND BEARING BLOCK USE NODULAR CAST IRON.
l WORKING WIDTH 2500MM, MAX. MACHINE SPEED IS 300M/MIN, UPPER CORRUGATED ROLLERΦ410mm, LOWER CORRUGATED ROLLERΦ 380MM. PRESSING ROLLER Φ520MM, GLUE ROLLER Φ320MM, DOCTOR ROLLER Φ180MM, PRE-HEATING ROLLER Φ400MM, MAIN MOTOR POWER: 45KW, FAN POWER: 22.5KW.
l THE MACHINE IS EQUIPPED WITH AN AUTOMATIC PLC GLUE ADJUSTMENT SYSTEM.
l STEAM HEATING
l DIAMETER, MATERIAL, SURFACE TREATING AND SURFACE HARDNESS OF ROLLERS